News RSS

Selecting the wood for guitar  When lumber is cut from logs, it is typically cut in one of three ways: quarter sawn, rift sawn or plain sawn. Each type of lumber is dependent on how the log is oriented and cut at the sawmill. The result is a particular orientation of the growth rings on the end grain of the board and is what defines the type of lumber.  The type of cut also determines the figure in a piece of wood and the wood’s mechanical properties. PLAIN SAWN / FLAT SAWN Plain sawn, also commonly called flat sawn, is...

This tool list set will save your time on finding tools that you need to setup your shop!  -Rock'n'Roller neck rest Rock-n-Rollers hold any guitar or bass neck in position for inspection or for minor repairs. They're useful additions to any repair bench or music store countertop. https://www.stewmac.com/Luthier_Tools/Types_of_Tools/Clamps/Rock-n-Roller_Neck_Rest.html -Notched straight edge  Notched Straightedge allows you to accurately check the flatness of your fingerboard, quickly measure neck relief, locate problem areas, and determine if truss rod adjustments are necessary. These straightedges are extremely precise, heavy duty, and designed to handle a lifetime of use in your shop. https://www.stewmac.com/Luthier_Tools/Types_of_Tools/Straightedges/Precision_Notched_Straightedge.html -6" ruler Centering ruleWith...